|
|
Based on the Silicon Image SiI 3114 chipset
supports up to 4 SATA drives!
You get two external and two internal RAID-ready SATA ports for your high performance SATA hard drives. Whether you need Striping (RAID 0), Mirroring (RAID 1), or
RAID 1+0),
this card has you covered. Also functions as non-RAID controller for up to 4 individual
drives!
|
|
Features:
|
- Silicon Image SiI 3114 chipset supports up to 4 SATA drives
- Two external and two internal SATA ports with data transfer up to 150
MBytes/sec
- Compliant with Serial ATA 1.0 specifications
- PCI 32-bit, 33/66 MHz host interface
- Integrated PCI DMA engines
- Metal shielded Serial ATA connectors for extra durability
- Supports RAID 0 (striping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability
- Use as non-RAID controller for up to 4 individual
drives
- Supports SATA hard drives of any capacity
|
|
What's In the box:
|
- SATA RAID PCI Card
- CD with RAID Software
- Two 18" Internal SATA Cables
- Two 4-pin LP4 to 15-pin SATA Power Adapter Cables
- Quick Installation Guide
|
|
2 External / 2 Internal Port SATA RAID PCI Card Specifications
|
- 2 external and 2 internal 7-pin SATA ports
- PCI Bus: 32-bit, 33/66 MHz
- Data Transfer Rate: Up to 150 Mbytes/sec
- FIFO: 256 Bytes per channel
- Supports first-party DMA commands for Native Command Queuing
- Supports SATA hard drives of any capacity
- Integrated PCI DMA engines
- Supports Spread Spectrum Receiver
- Built-in RAID 0, RAID 1, RAID 1+0 or use as non-RAID controller for up to 4 individual
drives
- Works as a non-RAID controller to add up to 4 individual drives
- Supports Hot Swapping of drives
- Standards: Serial ATA 1.0 standard
|
|
Minimum System Requirements
|
- Pentium II 400 MHz or faster desktop computer with available PCI slot
- Windows 98SE, Windows ME, Windows 2000 or Windows XP
|
