SATA II RAID PCI-X Card, 2 eSATA & 2 Internal SATA Ports

IN STOCK

Don't Forget
External Shielded eSATA Cables and
Internal SATA Cables 
Team Up this Controller with:
Seagate Serial ATA 3Gb/s SATA Hard Drives
Western Digital SATA II Hard Drives
Hitachi SATA II Hard Drives

Two external eSATA and two internal RAID-ready SATA ports for your high performance SATA hard drives. Whether you need Striping (RAID 0), Mirroring (RAID 1), Mirrored Striping (RAID 1+0) or Parity Striping (RAID 5), this card has you covered.  Also functions as non-RAID controller for up to 4 individual drives!   

• Silicon Image SiI 3124 chipset supports up to 4 SATA drives 
• Two external eSATA and two internal SATA ports
• Compliant with Serial ATA II specification (the extension of SATA 1.0a Revision 1.1)
• Compliant with Gen2i, Gen2m SATA II Electrical specification Revision 1.0 
• Backward compatible with SATA 1.0
• 64-bit PCI-X, 133 MHz host interface
• Integrated PCI DMA engines 
• Metal shielded Serial ATA connectors for extra durability 
• Supports SATA data rates up to 3Gb/sec (300 MB/s)
• Supports Native Command Queue (NCQ), Port Multiplier, First Party DMA 
• Supports RAID 0 (striping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability 
• Use as non-RAID controller for up to 4 individual drives
• Supports SATA I and SATA II hard drives of any capacity

• SATA PCI-X RAID Card
• CD with drivers and RAID Software
• Quick Installation Guide

• 2 eSATA and 2 internal SATA connectors
• PCI-X Bus: 64-bit, 133 MHz
• Supports SATA data rates up to 3Gb/sec (300 MB/s)
• FIFO: 256 Bytes per channel 
• Supports first-party DMA commands for Native Command Queuing 
• Supports SATA Port Multipliers
• Supports SATA I and SATA II hard drives of any capacity
• Integrated PCI DMA engines 
• Supports Spread Spectrum Receiver 
• Supports RAID 0, RAID 1, RAID 1+0, RAID 5
• Works as a non-RAID controller to add up to 4 individual drives
• Supports Hot Swapping of drives

• Windows PCs:
  • Pentium III 700Mhz or faster desktop computer
  • 128 MB RAM or more
  • Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
  • Operating Systems:
    • Windows 2000
    • Windows XP
    • Windows Server 2003
    • Vista
• Macs:
  • Provides SATA port multiplier compatibility on all four ports with an Apple PowerMac G4 or G5 running Mac OS X 10.3.x or 10.4.x. Not intended for use with individual SATA hard drives in a direct connect configuration.
  • Mac OS X Version 10.3.x or later
  • Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
  • Power Mac G4* 
  • Power Mac G5 with PCI-X slots (not compatible with G5 Dual or Quad, see Hi Performance x8 PCI-e eSATA card)

  * All models except Cube.