|
- Store large amounts of
data at ultra fast 300 MB/s data transfer rates
- Hot-swap capability allows you to insert or remove drives without
powering down the computer
- Breaks the 137GB barrier! Supports various brands
of large capacity Serial ATA hard drives
- LCD Display
monitors the SATA drive temperature
- LED indicators confirm power and proper drive insertion
- Comes complete with one Hot-Swap tray
|
|
 The SATA
Hot-Swap Internal Drive Kit provides high speed and Hot-Swapability at an
unbelievably low price. Now there is an affordable way to store large amounts of
data at ultra fast 300 MB/s data transfer rates. Even better, any SATA drive can
be removed in seconds and shared or replaced with another. The LCD Display
monitors the SATA drive temperature and warns if the drive is not operating
properly before expensive data losses occur.
Inexpensive SATA (Serial ATA) drives can now be used in Hot-Swap Trays and as much storage as
required can be dedicated for backup, DV, AV, database applications, and all other types of storage needs. To add more drives simply buy extra
Hot-Swap trays as needed. The trays are inexpensive and offer the best solution for large storage needs.
The heart of this SATA Hot-Swap System is unique Aluminum Tray technology that allows SATA drives to be inserted or removed while the computer is running and the power is on. The system operates very much like a floppy drive with the exception that the amount of storage is thousands of times larger.
True ATA-6 specification support provides compatibility with all the new larger drive mechanisms.
These units come complete with one Hot-Swap drive tray.
|
|
What's In the box:
|
- SATA Hot-Swap Internal Drive System
- One Hot-Swap Drive Tray
- Users Guide
|
|
SATA Hot-Swap Internal Drive Kit Specifications
|
- Bus Type: SATA, Serial ATA
- Compatibility: Compatible with all 3.5" SATA I or SATA II Hard Drives
- Performance: Up to 300 MB/s
- Cooling: Muffin Fan Design Ultra Quiet
- Power Requirements: 5 & 12 Volts DC Std. Power Conn. 10-15 watts
- Dimensions: 8 in. (L) x 5.75 in. (W) x 1.7 in. (H)
- Weight: 3 Lbs
|
|
System Requirements for
SATA Hot-Swap Internal Drive Kit
|
- Windows 98SE/ME/2000 or XP
- Available 5 1/4" Drive Bay
- SATA Serial ATA controller
- 4 pin Molex (LP4) power connection
- SATA data cable
|
