Need
Extra Drive Trays for this enclosure?
|
|
MSRP: $189.99
|
|
Your Cost, Only:
|
|
|
|
|
|
|
|
External SATA Hot-Swap Kit for SATA Hard Drives
|
|
- Store large amounts of
data at ultra fast SATA data transfer rates
- Hot-swap capability allows you to insert or remove drives without
powering down the computer
- Supports all 3.5" SATA 6Gb/s (SATA III), SATA 3Gb/s (SATA II)
and SATA 1.5Gb/s (SATA I) Hard Drives
- LCD Display
monitors the SATA drive temperature
- LED indicators confirm power and proper drive insertion
- Comes complete with 3' SATA Cable and one Hot-Swap tray
|
|
 The SATA
Hot-Swap External Drive Kit provides high speed and Hot-Swapability at an
unbelievably low price. Now there is an affordable way to store large amounts of
data at ultra fast 600 MB/s data transfer rates. Even better, any SATA I or SATA
II drive can
be removed in seconds and shared or replaced with another. The LCD Display
monitors the SATA drive temperature and warns if the drive is not operating
properly before expensive data losses occur.
Inexpensive SATA (Serial ATA) drives can now be used in Hot-Swap Trays and as much
external storage as
required can be dedicated for backup, DV, AV, database applications, and all other types of storage needs. To add more drives simply buy extra
Hot-Swap trays as needed. The trays are inexpensive and offer the best solution for large storage needs.
The heart of this SATA Hot-Swap System is unique Aluminum Tray technology that allows SATA drives to be inserted or removed while the computer is running and the power is on. The system operates very much like a floppy drive with the exception that the amount of storage is thousands of times larger.
True ATA-6 specification support provides compatibility with all the new larger drive mechanisms.
These units come complete with everything needed including a 3’ shielded SATA cable,
Hot-Swap drive tray and power cord (just add your SATA hard drive).
|
|
What's In the box:
|
- SATA Hot-Swap External Drive System
- One Hot-Swap Drive Tray
- AC Power Cord
- 36" eSATA cable
- Users Guide
|
|
SATA Hot-Swap External Drive Kit Specifications
|
- Bus Type: eSATA
- Compatibility: Compatible with all 3.5" SATA 6Gb/s (SATA III), SATA 3Gb/s (SATA II)
and SATA 1.5Gb/s (SATA I) Hard Drives
- Performance: Up to 600 MB/s
- Cooling: DOUBLE Fan Design Ultra Quiet
- Power Requirements: 115/230 VAC, 50-60 Hz 55 watts
- Dimensions: 10.5 in. (L) x 8 in. (W) x 2.5 in. (H)
- Weight: 7 Lbs
|
|
System Requirements for
SATA Hot-Swap External Drive Kit
|
|
|
|
|
